Chapter 72: Iron and steel
HTS heading 7228: Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonall…
47 numbered lines under heading 7228, including 35 10-digit statistical lines. The first six digits are the international HS subheading; the general column is the normal US duty rate.
| HTS code | Description | Unit | General | Special | Column 2 |
|---|---|---|---|---|---|
| 7228 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: | ||||
| 7228.10.00 | Bars and rods, of high-speed steel | Free | 32% | ||
| 7228.10.00.10 | Not cold-formed | kg | |||
| Cold-formed: | |||||
| 7228.10.00.30 | With a maximum cross-sectional dimension of less than 18 mm | kg | |||
| 7228.10.00.60 | With a maximum cross-sectional dimension of 18 mm or more | kg | |||
| 7228.20 | Bars and rods, of silico-manganese steel: | ||||
| 7228.20.10.00 | Not cold-formed | kg | Free | 28% | |
| 7228.20.50.00 | Cold-formed | kg | Free | 28% | |
| Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: | |||||
| 7228.30 | Of tool steel (other than high-speed steel): | ||||
| 7228.30.20.00 | Of ball-bearing steel | kg | Free | 29% | |
| 7228.30.40.00 | Of chipper knife steel, not cold-formed | kg | Free | 28% | |
| 7228.30.60.00 | Other | kg | Free | 29% | |
| 7228.30.80 | Other | Free | 28% | ||
| 7228.30.80.05 | Of high-nickel alloy steel | kg | |||
| 7228.30.80.10 | Concrete reinforcing bars and rods | kg | |||
| Other: | |||||
| 7228.30.80.15 | With a diameter or cross section measuring less than 76 mm | kg | |||
| 7228.30.80.41 | With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm | kg | |||
| 7228.30.80.45 | With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm | kg | |||
| 7228.30.80.70 | With a diameter or cross section exceeding 228 mm | kg | |||
| 7228.40.00.00 | Other bars and rods, not further worked than forgedNote: See 9903.90.09. | kg | Free | 28% | |
| 7228.50 | Other bars and rods, not further worked than cold-formed or cold-finished: | ||||
| 7228.50.10 | Of tool steel (other than high-speed steel)Note: See 9903.90.09. | Free | 29% | ||
| 7228.50.10.10 | Of ball-bearing steel | kg | |||
| Other: | |||||
| With a maximum cross-sectional dimension of less than 18 mm: | |||||
| 7228.50.10.20 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | |||
| 7228.50.10.40 | Other | kg | |||
| With a maximum cross-sectional dimension of 18 mm or more: | |||||
| 7228.50.10.60 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | |||
| 7228.50.10.80 | Other | kg | |||
| 7228.50.50 | OtherNote: See 9903.90.09. | Free | 28% | ||
| 7228.50.50.05 | Of high-nickel alloy steel | kg | |||
| Other: | |||||
| 7228.50.50.15 | With a diameter or cross section measuring less than 76 mm | kg | |||
| 7228.50.50.40 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm | kg | |||
| 7228.50.50.70 | With a diameter or cross section exceeding 228 mm | kg | |||
| 7228.60 | Other bars and rods: | ||||
| 7228.60.10 | Of tool steel (other than high-speed steel) | Free | 29% | ||
| 7228.60.10.30 | Of ball-bearing steel | kg | |||
| 7228.60.10.60 | Other | kg | |||
| Other: | |||||
| 7228.60.60.00 | Not cold-formed | kg | Free | 28% | |
| 7228.60.80.00 | Cold-formedNote: See 9903.90.09. | kg | Free | 28% | |
| 7228.70 | Angles, shapes and sections: | ||||
| 7228.70.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | Free | 10% | ||
| 7228.70.30.10 | U, I, H and T sections | kg | |||
| Other: | |||||
| With a maximum cross-sectional dimension of 76 mm or more: | |||||
| 7228.70.30.20 | Angles | kg | |||
| 7228.70.30.41 | Other | kg | |||
| With a maximum cross-sectional dimension of less than 76 mm: | |||||
| 7228.70.30.60 | Angles | kg | |||
| 7228.70.30.81 | Other | kg | |||
| 7228.70.60.00 | Other | kg | Free | 28% | |
| 7228.80.00.00 | Hollow drill bars and rods | kg | Free | 30% |
Statistical (10-digit) lines without a rate use the rate of the 8-digit line above them. Additional duties such as Section 301 and Section 232 may apply; check them with the tariff checker.
Free tools
Free customs and shipping tools
HTS Code Lookup
Search the full US Harmonized Tariff Schedule by product or code, with duty rates.
De Minimis & Tariff Checker
US de minimis status and the Section 301/232 tariffs that may apply to an import.
Landed Cost & Duty Calculator
Estimate import duties, taxes and fees so you can price DDP.
Commercial Invoice Generator
Make a customs-ready commercial invoice with HS codes, plus CN 22/CN 23-style declarations.
Want us to find the money leaking out of your shipping? Get a free profit-leak audit.
Request a free auditSource: Harmonized Tariff Schedule of the United States, 2026 HTS Revision 20 (effective 2026-09-28), U.S. International Trade Commission (hts.usitc.gov), imported 2026-10-07. Reference only; not legal or customs advice or a binding classification. Additional duties under Chapter 99 may apply. ShipWave is not affiliated with the USITC or U.S. Customs and Border Protection.